教程展示 Case
搜索 Search

890数字对频步骤参照

2014-7-29 14:30:04

暂无图片。

案例介绍
 1)  数字890-4对码操作步骤如下; 
    
      首先把显示屏与摄像头都插上电,按屏的左侧第3个键(也是确认键)进入主菜单,选择第3个子菜单:SYSTEM SET 按确认键确定后,会弹出菜单,再选择第3个:PAIRING 按确认键后,会出现:                         CAM  1  PAIRED,
CAM  2  PAIRED
CAM  3  PAIRED,
CAM  4  PAIRED


如选择CAM  1  PAIRED,按确认,屏中间有一排红色箭头在移动,表示在检查信号,如此同时,你再针尖工具(建议可用回形针扳直后),对准镜头下贴标签旁的小孔,内有个小按键对准,轻轻按下,屏幕出现了SUCCEED字样,表示已对好第1个镜头的码。如果没有对上,屏幕会显示FALL,需要重新对下。如此类推,可以一一对上码。如果4个镜头中3个能显示,只有1个不能显示,在确认电源都接好的情况下,看一看这个不能显示的镜头是几号,再重新对下码。


The first screen and camera are connected to power, Press third key(same the OK key) enter the main menu, select the third menu : SYSTEM SET and press the OK key, will pop-up menu, choose third menu:PAIRING press the OK key ,will display :
 CAM  1  PAIRED,
CAM  2  PAIRED
CAM  3  PAIRED,
CAM  4  PAIRED
When select the CAM  1  PAIRED and press OK key, there is a red sign in the screen, show it is checking the signal. At this time, you should find a little hole in the camera(the hole next to the camera’s label) ,use the needle push the button(it is build-in the little hole),in this way there is SUCCEED in the screen. Show the first camera is ok.when the screen display FALL,it means above operation will be again. And so on,the second camera ,third camera and fourthly camera.


       2) 数字890-4全屏显示步骤如下;
   
     屏跟摄像头都已通电,按屏的左侧第3个键(也是确认键)进入主菜单,选择第1个菜单:VIEWING MODE,按确认键,弹出3个子菜单:
     1. SPLIT 4 表示4个画面同时显示观看,4分割显示。一般出厂前默认是第1项。
     2. AUTO   表示全屏显示并自动切换(即有几个摄像头,就会几个轮流显示)
     3. MANUAL 表示全屏显示,不会自动切换,接2或4个,按ESC键是手动切换 显示全屏。
按要求选择所需要的菜单,按确认键确认后,按屏左侧第1个键即ESC退出即设置成功。


     3)  数字890-4录像设置步骤如下; 


     首先显示屏跟摄像头都通上电,插入存储卡
     按确认键进入主菜单后,选择第3个子菜单功能:SYSTEM SET按确认键后,弹出菜单画面,选择第1个子菜单:MOTION RECORD,按确认键弹出4个选择:5S  10S  ON  OFF  按ON键是开启录像功能,一直录到卡内满再覆盖,选择5S 或10S是表示以5秒或10秒1个片段来存储。选择OFF表示不录像。 这时,如打开动态录像会更省空间些,按ESC键返回到SYSTEM  SET菜单上面,选择最后一个SCREEN SAVER,按确认键确认,即是设置好了动态录像功能。


The first screen and camera are connected to power, insert the memory card.
Press third key(same the OK key) enter the main menu, select the third menu : SYSTEM SET and press the OK key, will pop-up menu, choose first menu: MOTION RECORD, press the OK key ,will display 4 choice :5S,10S, ON or OFF.select ON will be open the video and audio function, have been recorded in the card is full cover again, choose 5Sor 10S is said to 5 or 10 seconds a snippet to store. Select OFF said no record. 
    At this time, dynamic video will be more save space such as open, press the ESC key to return to the SYSTEM SET menu, select the last menu:SCREEN SAVER, and press OK key, will be to setup dynamic video recording.
更多案例